Cinospeaker _shelf
This beautiful speaker has a quality reproduction of sound, which is created by the elegant small housing. The aluminum cone mid woofer alongside of the true ribbon tweeter introduce an accurate high fidelity response in the range of 100 Hz - 20 kHz. The speaker can be used as a standalone on a shelf or with the stylish stand. In order to include a deeper bass playback, it can to be chained with Prismasonic woofer items by using a single amplified signal. Electrical crossovers take care of an appropriate filtering to pair the two items.
|
Cinospeaker _box
This small speaker is much similar to Cinospeaker _shelf but the enclosure design is still a bit smaller with a different orientation. The special design is intended to fit inside in the Cinocabinet _equipment box to operate as the center speaker of the flat panel television. The box speaker takes only a part of the cabinet volume, so it is still possible to store some AV equipment and bluray discs into the same drawer.
|
|
Cinospeaker _grand
This large but elegant speaker is an old school, master class 3-way speaker. An attractive outlook with the carefully selected speaker drivers, combined with the high quality crossover components make the product as an excellent choice for the most advanced users. The ribbon tweeter and the midwoofer take care of frequencies above 100 Hz, while the subwoofer driver produces the low notes down to 30 Hz. The 50-liter bass reflex housing with the rigid construction produces a strong, clean and dynamic playback. The speaker can be placed on a table, floor, shelf or on a specially designed stand. The crossover with a 4-pin back connector allows item also to be bi-wired, so that the tweeter and the mid are one amplified group, while the large woofer element gets powered by another amplifier.
|
|
Cinospeaker _module
The module speaker is a two box item with a volume of total 100 liters. In action, it sounds much like the Cinospeaker _grand, but with twice bigger enclosure it reaches the notes of around octave lower. In addition to generate deeper bass sounds, the lower speaker boxes are also used to carry the support constructions to form a complete self standing AV-module of front audio channels and the video screen. The speakers are intended out of sight, behind the screen. Thus, they are only available as unfinished MDF. The enclosure also has different sister model designs to fit the different masking system solutions by Prismasonic.
|
|
Cinospeaker _panel
The panel version of the speaker is a 2-way speaker combined with the a diffusive front construction. In addition to the high quality sound, which perfectly blends with the other speakers of the product family, this panel item has a very attractive outlook. As a stand alone product or in part of the large diffuser group, this component is a true eye catcher on the wall of the cinema room.
|
|
Cinospeaker _woofer
The subwoofer is a passive speaker for the low frequency audio reproduction. The carefully designed enclosure with appropriate support constructions avoid any vibration, which result a clean and dynamic low frequency playback. The item can be used as a single subwoofer for the sound system. On the other hand, it can be co-operated as a bass driver for the Prismasonic speakers of only tweeter and mid drivers, as they were together a one large 3-way speaker. The formed three way item can be powered by the single amplifier, or it can be bi-wired with two amplifiers of same signal.
|